H11
Tool Steel H11 is a chromium-based steel alloy from the “H” family .H11 is one of the most commonly used alloys from this group, thanks to the outstanding impact toughness.
| H11 | |
| Specifications | |
| N | 0.20% |
| Cr | 4.75-5.50 |
| Mo | 1.10-1.60 |
| Fe | Balance |
Tool Steel & Alloy Steel Scrap
Our Portfolio includes Tool Steel Scrap H11, H13, P91, P92, Low Alloy Scrap, etc.
H13
Other steels from H group, such as the H13 have more vanadium, which gives better wear resistance and temper resistance, but worse impact toughness.
| H13 | |
| Specifications | |
| V | 0.80%-1.20% |
| Cr | 4.75%-5.50% |
| Mo | 1.10%-1.75% |
| Si | 0.80%-1.20% |
P91 & P92
P91 is the mix of chrome , molybdenum plus vanadium. The chrome increases temperature strength and oxidation resistance. The molybdenum increases the elasticity, resistance to wear, and high temperature creep strength.
| P91 | |
| Specifications | |
| V | 0.18% - 0.25% |
| Cr | 8.00% - 9.50% |
| Mo | 0.85% - 1.05% |
| P92 | |
| Specifications | |
| V | 0.15%-0.25% |
| Cr | 8.00% - 9.50% |
| Mo | 0.30%-0.60% |
Low Alloy Scrap
Shall consist of clean, uncoated and unpainted low copper aluminum scrap of two or more alloys and to be free of 2000, 4000 and 7000 series, road or highway signs, license plates, radiators, finstock, foil, hair wire, screen wire, dirt, plastic and other foreign substances. Also free from punchings, turnings, shavings, scalper and fines.
| Low Alloy Steel Scrap | |
| Specifications | |
| Fe | 95.195%-96.33% |
| Cr | 0.700% - 0.900% |
| Mo | 0.200% - 0.300% |
| Ni | 1.65%-2.00% |
Manganese Steel Scrap
Manganese Steel Scrap,has features like durability and sturdiness,as it is manufactured from top quality manganese steel. The steel scraps are checked properly on industry defined parameters and sent to the factory for reuse. This type of steel is rust resistance with high strength and can be re-used again.
| Manganese Steel scrap | |
| Specifications | |
| Mn | 11.00%-12.00% |
| C | 1.00% - 1.40% |